Boat transport Calgary, AB, Canada
Call CanAm Transportation Inc 1-773-234-6669
Boat transport Calgary, AB, Canada process can be basically divided into three categories which are based on the boat’s type:
- Power boats
- Sailboats
- Yachts
Boat transport Calgary, AB, Canada – Power Boat Transportation
Power boat transport Calgary, AB, Canada difficulty will greatly depend on their dimensions and in some cases various state regulations may require larger loads to be escorted by a pole car. This of course may have a significant impact on the boat transport Calgary, AB, Canada cost.
Another important factor is a specialized Calgary, AB, Canada power boat transportation trailer. In case you are providing your own boat trailer make sure that it has been inspected and prepared for a trip prior to the arrival of a boat transport Calgary, AB, Canada operator.
Check the following on your boat’s trailer:
- Tires – they must be in good condition, with deep tread, especially for longer distances
- Brakes – check those well and make sure they respond properly
- Coupler – make sure that all its movable parts are functional
- Trailer lights – turn signals, reverse, and brake lights must be functional
- The bow condition
- Transom straps – replace worn out straps prior to boat transport Calgary, AB, Canada
- Check trailer’s frame condition, look for stress cracks, especially along the welds
All those things will be re-checked by the driver but you don’t want to find out about any problems from him. It will most likely delay your scheduled boat transport Calgary, AB, Canada process and cost more money to setup another boat transportation date.
On top of that checklist you should take a close look at the interior and prepare it for boat transport Calgary, AB, Canada as well (applies to all types of boats).
- Any exposed / loose boat cushions should be secured or even better; removed and safely stored below deck to prevent them from flying off the boat during transportation
- Preferably boat canvas should be removed and stored away as well. The same applies to any parts of the boat that might become loose during transportation; they should be stored away or secured
- Boat’s electronic equipment not permanently installed or removable by design should be stored in a locked compartment or secured inside the driver’s truck for the boat transport Calgary, AB, Canada
- The windshield and wind screen might be compromised during the boat transportation, therefore, it is highly recommended to have them removed and secured under the deck
Boat transport Calgary, AB, Canada ” Sailboat transportation
Sailboats require slightly different handling approach during boat transport Calgary, AB, Canada preparation mainly because their weight distribution is unlike that of the power boats. Because of that, at least 50% of the sailboat’s weight must be on its keel when loading it onto the trailer. Sailboat weight distribution also demands more supporting stands along its hull to prevent it from damage / crushing when balancing and boat transport Calgary, AB, Canada process, especially on the wood hulled sailboats.
The interior of the sailboat usually needs much more attention than the power boat transport Calgary, AB, Canada preparation tasks. Because of the legal height transportation limitations (13 feet and 6 inches in most states) some of the items even permanently secured to the sailboat’s deck might need to be dismantled in order for the sailboat’s transportation to proceed.
The sailboat’s mast should be protected to prevent its damage; using shrink wrap or some other type of packaging material, carpet serves this purpose very well.
Boat transport Calgary, AB, Canada ” Yacht transportation
Yacht transportation Calgary, AB, Canada covers larger size power boats and sailboats and due to their dimensions and regardless of the distance to be covered during your boat transport Calgary, AB, Canada, a pole car is usually a necessity. There’s also much more preparation involved prior to this type of boat transport and all efforts used in a process of reducing the height of the yacht loaded onto the trailer. Every additional inch is crucial and might impact the route planning through the country.
Boat transport Calgary, AB, Canada ” shrink wrap it or not
As with almost everything else, there are positive and negative aspects of the boat shrink wrapping prior to transportation. While shrink wrap may protect boat’s surface from tar, dirt, and smaller stones, it may also cause some damage if torn and flapping during boat transport. It’s not uncommon for the boat shrink wrap to be completely blown away during transportation.
There are also sailboats painted with Awlgrip® or Imron® which should not be shrink-wrapped for boat moving Calgary, AB, Canada unless the wrapping material comes below the gunwale. Additionally the perimeter band must be separated from the hull using foam blocks.
About Illinois Vehicle Transport
